Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 195 / 221
Strict confidential
Figure 144 : attachment of the RF antenna coaxial cable
Several configurations of antennas are possible depending on the number of LoRa modules
used. They are listed in the following paragraphs.
4.6.2.5.2
Single LoRa module / single omnidirectional antenna
In this configuration, the Wirnet iBTS receiver supports 16 channels.
Figure 145 : Single LoRa module / single omnidirectional antenna connections
Slots provided to attach
the antenna cable
