Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 128 / 221
Strict confidential
-NTC Type Approval required-
The Wirnet iBTS 915 is compliant to:
Memorandum Circular MC 03-08-2013 amending MC 09-09-20003 for Wireless data
Networks and Devices
Memorandum Circular n°20-12-92 : Implementing guidelines for Cellular Mobile
Telephone System (CMTS) operations in the Philippines
Memorandum Circular n°07-08-2005 : Rules and regulations on the Allocation and
Assignment of 3G Radio Frequency bands
Memorandum Circular n°01-03-2010 : Rules on the Assignment of the Remaining
Allocated 3G Radio Frequency Band
PNS –IEC 60950-1 - Information Technology Equipment – Safety – Part 1: General
requirements.
In Philippines, the Wirnet iBTS 915 can be used with the following limitations:
Item
Specification
Frequency range
915-918MHz
Max ERP
250mW
Max conducted power with 3dBi antenna
+23dBm (200mW)
Max conducted power with 6dBi antenna
+20dBm (100mW)
Channelization
200KHz
Number of channels
14
Channels center frequency
915.2 MHz +n*0.2MHz (0<=n<=13)
No frequency channels arrangement defined in LoRaWAN specification and the regional
parameters as defined in [1] and [2] can be applicable to Philippines. Alternate JointReq
channels must be then defined.
Note:
A 915-920MHz cavity filter may be required in Philippines to avoid saturation and
desensitization of the LoRa receiver due to co-located EGSM900 base stations. This cavity
filter is described in §1.8.3.4.
2.3
Wirnet iBTS 923
The Wirnet iBTS 923 is compliant to:
-
IEC 60950-1:2005/A1:2009/A2:2013
-
CENELEC EN 60 950-1 (Ed. 2006/A11 : 2009/A1 : 2010/A12:2011/A2:2013)
-
AS/NZS 60950.1 : 2011
-
GB4943-2011
-
K60950-1
-
J60950-1