Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 123 / 221
Strict confidential
Frequency (MHz)
Power
Duty cycle
868-868,6
14dBm ERP
1%
868,7-869,2
14dBm ERP
0,1%
869,4-869,65
27dBm ERP
10%
869,7-870
7dBm ERP
100%
The frequency channels arrangement is the same as in Europe i.e. must be compliant to the
LoRaWAN specification and the regional parameters (EU 863-870 MHz) as defined in [1] and
[2].
2.1.4
Saudi Arabia
-CITC approval required-
The Wirnet iBTS 868 is compliant to:
RI054 – Specifications for Non‐specific Short Range Devices and Ancillary Equipment
National Guideline for Human Exposure to Radiofrequency Electromagnetic Fields,
2009
GEN001 – Technical Specification – General Requirements
IEC 60950-1: 2005 + A1: 2009 + A2: 2013 - Information technology equipment -
Safety - Part 1: General requirements
In Saudi-Arabia, the Wirnet iBTS 868 can be used with the following limitations:
Frequency (MHz)
Power
865-868
14dBm ERP
868-868,6
14dBm ERP
868,7-869,2
14dBm ERP
869,4-869,65
27dBm ERP
869,7-870
7dBm ERP
The frequency channels arrangement is the same as in Europe i.e. must be compliant to the
LoRaWAN specification and the regional parameters (EU 863-870 MHz) as defined in [1] and
[2].
2.1.5
United Arab Emirates
-TRA Type approval required-
The Wirnet iBTS 868 is compliant to:
TS031 – Non Specific Short range Devices
TS001 – EMC and Safety Requirements