SB-593 Satellite Board
Unit 17 Park Farm Industrial Estate
01925-001 Rev. 1.2
Buntingford, Herts SG9 9AZ UK
TEL: 0870 444 7234 FAX: 0870 444 7240
Web: http://www.kerisystems.co.uk E-mail: [email protected] Page 12 of 16
Quick S
tart Guide
SB-593
7.2
General Purpose Input/Output Configuration Connections for Doors
This configuration assumes JP12 is
ON
configuring the Satellite board for general purpose inputs and outputs.
7.2.1
Output Relays Table
Please refer to Figure 1 on page 1 for output relay wiring locations.
•
See page 13 for a sample General Purpose Output – Normally Closed Relay drawing.
•
See page 13 for a sample General Purpose Output – Normally Open Relay drawing.
Table 4: Output Relays
TB-7/TB-10 Relay Outputs
Description
TB-7 – Pin 1
GPO 1 – normally open line
TB-7 – Pin 2
common/ground
TB-7 – Pin 3
GPO 1 – normally closed line
TB-7 – Pin 4
GPO 2 – normally open line
TB-7 – Pin 5
common/ground
TB-7 – Pin 6
GPO 2 – normally closed line
TB-10 – Pin 1
GPO 3 – normally open line
TB-10 – Pin 2
common/ground
TB-10 – Pin 3
GPO 3 – normally closed line
TB-10 – Pin 4
GPO 4 – normally open line
TB-10 – Pin 5
common/ground
TB-10 – Pin 6
GPO 4 – normally closed line
