23.2 Configuration of VPN clients
289
Figure 23.6
VPN server settings — server port and routes for VPN clients
Custom Routes
Other networks to which a VPN route will be set for the client can be specified in this
section. By default, routes to all local subnets at the VPN server’s side are defined — see
chapter
).
Hint
Use the
255.255.255.255
network mask to define a route to a certain host. This can be
helpful for example when a route to a host in the demilitarized zone at the VPN server’s
side is being added.
23.2 Configuration of VPN clients
The following conditions must be met to enable connection of remote clients to local networks
via encrypted channels:
•
The
Kerio VPN Client
must be installed at remote clients (for detailed description, refer
to a stand-alone document,
Kerio VPN Client — User Guide
).
•
Users whose accounts are used for authentication to
Kerio VPN Client
must possess
rights enabling them connect to the VPN server in
WinRoute
(see chapter
).
•
Connection to the VPN server from the Internet as well as communication between
VPN clients must be allowed by traffic rules.
Summary of Contents for KERIO WINROUTE FIREWALL 6
