©2000, KEPCO, INC
1
Data subject to change without notice
228-1405
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC.
"
131-38 SANFORD AVENUE
"
FLUSHING, NY. 11352 U.S.A.
"
TEL (718) 461-7000
"
FAX (718) 767-1102
http://www.kepcopower.com
"
email: [email protected]
An ISO 9001 Company.
DIN MRW-150P,
-160P, -170P
DIN-RAIL MOUNTING KIT
FOR SERIES MRW 150/151KV, 160/161KV, 170/171KV
DESCRIPTION.
Kepco KITs, Models DIN MRW-150P, MRW-160P and MRW-170P each contain a cover, a cable kit, a
mounting bracket with left and right preassembled mounting clips and associated hardware used to install MRW Series
power supplies on a DIN rail. The -150P suffix is for the 35 Watt MRW 150/151KV models. The -160P suffix is for the
50 Watt 160/161KV models. The -170P suffix is for the 65 Watt MRW 170/171KV models. The “P” suffix is for mount-
ing the power supply perpendicular to the DIN rail as shown in Figure 1. Outline Dimensions are shown in Figure 5
FIGURE 1. P SUFFIX ORIENTATION
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
CABLE
KIT
PART
NO.
COVER
PART
NO.
MOUNTING
BRACKET
PART NO.
SCREW
(QTY 4)
(Power Supply
To Mounting
Bracket)
PART NO.
WASHER
(QTY 4)
(Power Supply
To Mounting
Bracket)
PART NO.
CLIP
(QTY 2)
PART
NO.
CLIP
PLATE
(QTY 2)
PART
NO.
SCREW
Thread-form
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
WASHER
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
DIN MRW-150P
219-0184
CA 19
128-2048
101-0383
(8-32 X 3/16
PHPH)
103-0017
(NO. 8, INT.
TOOTH)
108-0362 128-1938
101-0443
(4-40 X 1/4
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
DIN MRW-160P
219-0184
CA 20
DIN MRW-170P
219-0239
CA 20
