BIT 4886 051010
2-1
SECTION 2 - INSTALLATION
2.1
UNPACKING AND INSPECTION
The Interface Card has been thoroughly inspected and tested prior to packing and is ready for
operation following installation. Unpack, saving original packing material. If any indication of
damage is found, file a claim immediately with the responsible transport service. See Table 2-1
for items supplied.
2.2
SET START-UP DEFAULTS (SEE FIGURE 2-1)
The start-up default, consisting of the Device Address (GPIB address) is initially set by means of
DIP switches as described in PAR. 2.2.1. The default power supply identification is described in
PAR. 2.2.2.
TABLE 2-1. ITEMS SUPPLIED
ITEM
KEPCO PART NUMBER
QUANTITY
PCB Assembly
236-1836
1
Cable #1
241-0889
1
Cable #2
241-0899
1
Knurled Nut
(6-32 x 3/4 DIA. BR., THUMB)
102-0023 3
Washers
(#6 EXT. LOCK, STEEL)
103-0046
3
Label, Address
188-1726
1
Label, Control Identification
188-1826
1
Bracket
128-1810
1
Connector (see NOTE)
142-0506
1
Cable (see NOTE)
118-1164
1
NOTE: Item not required for installation; used to connect RS 232 port to an external
computer.
