KEPCO BHK 1000-0.2MG, Operator'S Manual

Page: 153 / 154

BHK-MG (OPR) 032816
B-21/(B-22 Blank)
-221,”Settings Conflict”
Execution error bit 4 Invalid password from syst:pass:cen command.
-222,“Data out of range”
Execution error bit 4 Value exceeds power supply rating.
-223,”Data format error”
Execution error bit 4 Multiple decimals in digit, Multiple E, etc.
-224,“Illegal parameter value”
Execution error bit 4 For example, OUTP 2 instead of OUTP 1.
-226,”Lists not Same Length”
Execution error bit 4 Dwell list does not match voltage or current list, or no
points found for voltage or current list.
-241,”Hardware missing”
Execution error bit 4 Requesting device 2 status (INST:NSEL 2).
-282,”Illegal program name”
Execution error bit 4 Executing prog:run without LIST:SEQ command.
-301,”Value bigger than limit”
Device Error bit 3
(1)
Requesting a time of 656 which is bigger than limit.
-311,”Memory error”
Device Error bit 3
(1)
Power-up NV RAM error.
-314,”Save/recall memory error”
Device Error bit 3
(1)
Using cell other than 1 - 41 for SAV and RCL.
-341,”Non Volatile Mem. CRC
error”
Device Error bit 3
(1)
Power supply constants may be corrupted; recalibration
may be necessary.
-350,Queue overflow
Device Error bit 3
(1)
More than 15 errors are in queue.
-410,”Query interrupted
Query Error bit 2 New command sent before data from previous query read.
Previous query data lost.
-430,Query Deadlocked
Query Error bit 2 Over 255 characters received in single input string.
(1) The Device error bit may be set when the status monitoring functions of the power supply detect an overvoltage/undervolt-
age condition.
TABLE B-4. ERROR MESSAGES (CONTINUED)
ERROR MESSAGE
ESR ERROR BIT SET
(SEE PAR. A.5)
EXPLANATION