Keo KOROMO, Installation Instructions Manual

Page: 31 / 156

3–4 x ON/OFF
KOROMO
by KEO
31
After the initialisation phase, activate and disactivate the faucet 3 to 4 times. The sensor uses the first few detections
to adjust the sensor’s sensitivity level. Throughout the product’s lifetime the sensor autocalibrates to ensure that the
system maintains a stable performance.
TROUBLESHOOTING
IF THE SYSTEM IS IRRESPONSIVE OR SUFFERS FALSE DETECTIONS, THEN IT IS POSSIBLE THAT:
Cables are in contact with the water hoses or metalic parts: readjust box installation
to ensure that the sensor cable doesn’t contact the water hoses or metalic parts
The waste water siphon is metallic: Replace with plastic waste water pipe
Faucet’s pipe thread is in contact or too close to the sink: adjust the faucet’s position on the
sink to ensure that the pipe thread is in the centre of the sink’s faucet hole
The batteries are discharged or misoriented
The box is too close from any electrical equipment, cable or metallic pipe
(dishwasher, washing machine, dryer, …)
The faucet is too close from neons or fluorescent light sources
After checking the above points, repeat steps 9 and 10.
If the problem persists please contact your maintenance provider.