Kenwood XD-951 Instruction Manual Download Page 52

Page: 52 / 68

XD-951/A900/A700 (En)

Preparation section

Application section

Knowledge sections

Adjust the volume.

Play a video software program.

Activate the DOLBY PRO LOGIC mode.

DOLBY PRO LOGIC surround playback

Before playing a video (or LD) software program carrying
the

mark, be sure to complete the “DOLBY

PRO LOGIC surround adjustment”.

To cancel DOLBY PRO LOGIC surround play

After several seconds, return is made to the original display.

To decrease

To increase

Effective Sound Adjustment

Adjust the volume balance.

Generate the test tone.

Align the speaker volume with the
main speaker volume.

Stop the test tone.

TEST TONE

CENTER

TEST TONE

Center speaker
volume

Surround
speaker volume

To increase

To decrease

To increase

To decrease

Be sure to adjust from your listening position.

The volume level can be adjusted in steps of 1 dB.

The volume levels can be adjusted in the range from -10 dB to +10 dB.

The center level value is memorized as a common setting with DOLBY

3 STEREO.

In NORMAL and WIDE
BAND mode:

TEST L (Left)

TEST C (Center)

TEST R (Right)

TEST S (Surround)

In PHANTOM mode:

TEST L (Left)

TEST R (Right)

TEST S (Surround)

VOLUME

PRO LOGIC

DOLBY

The test tone which is heard like noise moves between speakers at an
interval of 1.5 sec.

The speaker volumes are to be adjusted while listening to the test tone.

The display and test tone output speaker are switched auto-
matically.

Scrolled display (DOLBY PRO LOGIC)

(Center mode display)

(Delay time display)

SURROUND

STEREO

Summary of Contents for XD-951





































































Search results

Summary of Contents for XD-951

Reviews:

Kenwood XD-951, Instruction Manual, Page: 52 / 68

Search results

Summary of Contents for XD-951

Reviews: