XD-951/A900/A700 (En)
28
Preparation section
Basic section
Application section
Knowledge sections
Let’s record
1
Press the play key corresponding to
the desired direction.
2
Stop playback (by pressing the
&
key).
To reverse the transport direction
When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded .
i
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control
unit.
Note that this cassette deck cannot record onto Metal tapes.
Note
Note
÷
When recording is started, the tape is trans-
ported in the direction selected in this step.
÷
Wind the tape to the position where recording
is to be started.
Check the tape transport direction
indicator.
Transport direction
Recording
(Deck B only)
1.
Load a tape in deck B.
1
Open the door of deck B.
2
Insert a tape.
3
Close the door.
2.
Select the tape transport direction.
3.
Set the recording condition.
1
Select the reverse mode.
2
Select the DOLBY NR mode.
2
2
1
1
3
3
4
4
5
5
0
PUSH
OPEN
1
1
A
3
2
7
2
2
REV.MODE
DOLBY NR
3
3
NR
B
00 0
0
E
P
A
T
÷
Differentiation between normal (TYPE ) and
high (TYPE ) tape is set automatically.
÷
Remove tape slack before loading.
(Except for some areas)
÷
When the microphone is not used, set the
MIC
VOL.
control knob fully counterclockwise to
the minimum position.