MAKING A CALL
Use the [
PTT
] key on this unit or the [
PTT
] key on the clip
microphone to make a call.
1
Speak into the microphone while pressing the [
PTT
] key.
●
When a clip microphone is connected, the built-in microphone on
this unit cannot be used.
2
Release the [
PTT
] key to end the call.
o
Operation on configuring the microphone function
The
“
PTT
”
,
“
PTT Lock
”
and
“
VOX
”
methods of calling are available
using the [
PTT
] key. The method varies depending on the setting.
The operation method using the
“
PTT
”
setting is described in this
manual.
PTT
You can make a call while the [
PTT
] key on this unit or the
clip microphone is being pressed.
PTT Lock
Press the [
PTT
] key on this unit or the clip microphone to
call. Press it again to end the call. If “PTT-Lock Delay”is
configured, the call ends automatically when the duration
configured elapses.
VOX
The microphone automatically turns ON in response to
audio signals. Hands-free call is possible without having to
press the [
PTT
] key.
Note:
●
“
PTT
”
is the default setting.
●
The PTT, PTT Lock and VOX settings can be changed using the
“
Setup menu mode
”
. For details, refer to
“
Configuring each function
(Setup menu mode)
”
.
You can also use the Programming Software WD-ZS10 to configure
the setting.
22
Summary of Contents for WD-K10PBS
Page 147: ......
