Kenwood TS-990S, Instruction Manual

Page: 246 / 290

16 USEFUL FUNCTIONS
16-14
Index Contents
CONFIGURING THE NETWORK ADMINISTRATOR
If you operate the transceiver via a LAN, it is necessary to
configure the LAN administrator ID and password.
[F1]~[F7]
[MENU] F[LAN]
[MULTI/CH]
■ Configuring the Administrator ID
1 Press [LAN] (F) on the Menu screen to open the LAN
screen.
2 Access Menu 07, "Administrator ID".
3 Press [EDIT] (F4) to allow editing of the parameter box.
4 Use the functions keys and the MULTI/CH control to
edit the administrator ID.
You can configure the administrator ID with a maximum of 8
alphanumeric characters. The default is "admin".
[SPACE] (F1): Press to enter a space.
[-] (F2)/[+] (F3): Press to display the previous character or
the next character.
[
] (F4) and [ ] (F5): Press to move the cursor
to the left or right.
[BACK SPACE] (F): Press to delete the character to the left
of the cursor.
[DEL] (F): Press to delete the character to the right of the
cursor.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !”# (symbols) > ABC (upper case)
5 Press [SAVE] (F6) to save the text string.
Pressing [CANCEL] (F7) clears the entered parameter and
reverts to the LAN screen.
6 Press [MENU] to exit.
■ Configuring the password
1 Press [LAN] (F) on the Menu screen to open the LAN
screen.
2 Access Menu 08, "Administrator Password".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Use the functions keys and the MULTI/CH control to
edit the administrator ID.
Enter the password using a maximum of 8 alphanumeric
characters. The default is "Kenwood".
[SPACE] (F1): Press to enter a space.
[-] (F2)/[+] (F3): Press to display the previous character or
the next character.
[
] (F4) and [ ] (F5): Press to move the cursor
to the left or right.
[BACK SPACE] (F): Press to delete the character to the left
of the cursor.
[DEL] (F): Press to delete the character to the right of the
cursor.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !”# (symbols) > ABC (upper case)
5 Press [SAVE] (F6) to save the text string.
Pressing [CANCEL] (F7) clears the entered parameter and
reverts to the LAN screen.
6 Press [MENU] to exit.
Note:
◆ The ID and password are case sensitive.
◆ To remotely control the transceiver by connecting to a home
network using ARCP-990 Radio Control Program and ARHP-
990 Radio Host Program, you must also configure the ID and
password, which were configured for the transceiver, for ARCP-990
and ARHP-990. For details, refer to the help texts attached to the
ARCP-990 and ARHP-990.
◆ If you used the transceiver connected to a home network, configure
60000 (fixed) for the port number and use TCP for the protocol.
◆ You cannot use a ";" (semicolon) or 0x80 or any of the following
characters for the Administrator ID or password.