Kenwood TS-990S, Instruction Manual

Page: 239 / 290

USEFUL FUNCTIONS 16
16-7
Index Contents
ASSIGNING VARIOUS FUNCTIONS TO THE
MICROPHONE PF KEYS
If you connect the microphone or the self-made selector
to the MIC connector on the front panel, a maximum of six
functions can be assigned to the PF keys.
• MC-43S: [DOWN] and [UP]
• MC-47: [PF 1] to [PF 4], [DOWN], and [UP]
• MC-60A: [DOWN] and [UP]
• MC-90: [DOWN] and [UP]
1 Select Group No. 0, "Basic Configurations", from the
Menu screen.
2 Access the desired one from Menu 27, "Microphone
PF 1: Key Assignment", to Menu 32, "Microphone UP
Key: Key Assignment".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5), or rotate the MULTI/CH
control to select the function to be assigned to a PF
key.
Refer to the List of Functions for Key Assignment for the
defaults of each PF keys. {page 16-8}
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ The MC-47 microphone has been discontinued and is no longer
available.
◆ When making your own selector, refer to the circuit diagram below.
１
２
３ ４ ５
６
７
８
22kΩ
100kΩ
22kΩ
100kΩ
UP
DOWN
PF1
PF2
PF3
PF4
ASSIGNING VARIOUS FUNCTIONS TO THE EXTERNAL
PF KEYS
You can connect a self-made selector to the KEYPAD jack
on the rear panel.
1 Select Group No. 0, "Basic Configurations", from the
Menu screen.
2 Access the desired one from Menu 19, "External PF
1: Key Assignment", to Menu 26, "External PF 8: Key
Assignment".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5), or rotate the MULTI/CH
control to select the function to be assigned to a PF
key.
Refer to the function list for the default settings. {page 16-8}
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ When making your own PF keypad, refer to the circuit diagram
below.