Kenwood TKR-750 Programming Reference Manual Download

Page: 7 / 83

1 SETTING UP THE KPG-91D

Field Programming Reference (FPRG)

Version: 1.01

You can install the KPG-91D with one of the following
methods.

•

Double-click the CD-ROM drive icon > “setup.exe”.

•

Select “RUN” > “setup.exe” in the CD-ROM drive.

•

Click “Control Panel” > “Application addition/
removal” > “Install”. (Click “Add Programs” when
using Windows 2000/XP.)

The setup program displays the instructions during
installation. Follow the instructions on the screen to install
the software.

1.4

Uninstalling KPG-91D

Follow the procedures below to uninstall KPG-91D from
the PC.

Note:

You must exit the KPG-91D before uninstalling it.

You must have the administrative privilege in order to uninstall
the KPG-91D from the PC (Windows 2000/XP).

To update the software, uninstall the old version before installing
the newer version.

Execute the “Application addition/ removal” command
in the control panel.

Select the “KPG-91D” from the program list.

Click “Application addition/ removal”. (Click “Change/
Delete Programs” when using Windows 2000/XP.)

Summary of Contents for TKR-750




















































































Search results

Summary of Contents for TKR-750

Reviews:

Related manuals for TKR-750

Brands by name

Popular brands

Kenwood TKR-750, Programming Reference Manual

Search results

Summary of Contents for TKR-750

Reviews:

Related manuals for TKR-750

Brands by name

Popular brands