Kenwood TKR-750, Programming Reference Manual

Page: 67 / 83

7 PROGRAM MENU
62 Field Programming Reference (FPRG) Version: 1.01
7.3.3 Wide/ Narrow
It can select the Bandwidth for the Test Channel. Select
from Wide and Narrow from the dropdown list. (Refer to
FUNC 1.4 Transmission Bandwidth.)
7.3.4 Beat Shift (Test Mode)
It can select the Beat Shift function to the Test Channel.
The Beat Shift function eliminates the problems of the
internal beat caused by internal oscillators. Select “Yes”
or “No” from the dropdown list.
7.3.5 Power (Test Mode)
It can select the transmit output power for the Test
Channel. Select “High” or “Low” from the dropdown list.
7.3.6 Monitor (Test Mode)
It can enable/disable Squelch of the Test Channel. Select
“Off” or “On” from the dropdown list.
7.3.7 Compander (Test Mode)
It can select Compander for the Test Channel. This
function improves the quality of the received tone by
reducing the noise. Select “Off” or “On” from the
dropdown list.
7.3.8 Repeat
It can configure Repeat operation to the Test Channel.
Select “Off” or “On” from the dropdown list.
7.3.9 TX/RX Button
Click “TX/RX” to toggle between transmission and
reception.
7.3.10 Print Button
Click “Print” to print out the configured Tuning Data.
7.3.11 Tuning Mode
It can make various adjustments for the TKR-750/850/
751/851 by the KPG-91D.
Double-click the function in the list box in the “Test Mode”
window to view the adjustment window of the selected
function.
(Refer to Table 7-2 Functions that you can adjust
in PC Tuning Mode.)
Figure 7-4 Example: “Frequency Adjustment” window
Note: Refer to the Service Manual how to adjust the TKR-750/850/
751/851 also.
Range Wide, Narrow
Default Wide
Range
Yes The Beat Shift function is enabled.
No The Beat Shift function is disabled.
Default No
Range High, Low
Default High
Range
Off Squelch is disabled.
On Squelch is enabled.
Default Off
Range
Off Compander is disabled.
On Compander is enabled.
Default Off
Range
Off Repeat is disabled.
On Repeat is enabled.
Default Off