Kenwood TK-2170 SERIES, Function Reference

Page: 18 / 142

1 BASIC FUNCTIONS
6
Index Contents
Confidential FUNC (K)/Ver. 1.01
1.10 Keypad Operation
Keypad operation can be configured for the user
preference.
A frequently used function can be configured for access
via the keypad.
Keypad operation can be configured by using
KPG-101D. The following functions can be assigned to
the keypad.
Table 1-8 Available Functions
„ Configuration using KPG-101D
• Configuring the Keypad Operation (Refer to
FPRG 6.8.2 General Tab - Keypad Operation.)
1.11 Call Key
The Call key is used to send FleetSync Status, 2-tone
and DTMF codes with single key operation.
The transceiver directly sends Status, 2-tone or DTMF
codes configured by using KPG-101D if the
Call 1 or Call
2 key is pressed. The timing and duration to send codes
vary depending on the parameters of FleetSync, 2-tone
or DTMF. The FleetSync Status code is sent to the
Target Fleet/ Target ID.
Assign the function to be sent to the
Call 1 or Call 2 key
by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the
Call Key (Refer to FPRG 6.8.4
Call Tab.)
1.12 Mic Sense
Mic Sense Control can be switched between Normal and
High Level. The gain difference between Normal and
High Level is approximately 4 dB.
Mic Sense Control can be configured by using KPG-101D.
„ Configuration using KPG-101D
• Configuring the Mic Sense (Refer to FPRG 6.7.1
Common Page 1 Tab - Mic Sense.)
• Configuring the Emergency Mic Sense (Refer to
FPRG 6.14.12 Emergency Mic Sense.)
Configuration Operation
OST (Operator
Selectable Tone)
Using the keypad, the OST can be
selected from the OST List 1 to 40.
Channel Entry
Using the keypad, channels can be
directly selected.
DTMF (Autodial)
Using the keypad, the transceiver can
send a selected DTMF code.
The Autodial List configured by using
KPG-101D can be selected and sent.
A DTMF code can be entered and sent if
Store & Send is enabled.
A DTMF code can be entered and sent
when the
Autodial key is pressed.
DTMF (Keypad
Auto PTT)
Using the keypad, the transceiver can
directly send DTMF codes.
FleetSync (Selcall)
Using the keypad, the transceiver can
make a FleetSync Selcall.
The Selcall List configured by using
KPG-101D can be selected and sent.
A Selcall ID code can be entered and sent
if Manual Dialing is enabled.
A Selcall ID code can be entered and sent
if the
Selcall key is pressed.
FleetSync (Status)
Using the keypad, the transceiver can
send a FleetSync Status message.
The Status List configured by using KPG-
101D can be selected and sent.
A Status data number can be entered and
status data can be sent if Manual Dialing
is enabled.
The transceiver can also send Status data
when the
Status key is pressed.
FleetSync
(S Status)
Using the keypad, the transceiver can
send FleetSync S Status.
The Selcall List or Status List configured
by using KPG-101D can be selected and
sent.
A Selcall or Status code can be entered
and sent if Manual Dialing is enabled.
The transceiver can also send the Selcall
List or Status List when the
S
Status key is pressed.