Kenwood TK-2170 SERIES, Function Reference

Page: 124 / 142

21 SCAN
112
Index Contents
Confidential FUNC (K)/Ver. 1.01
„ Configuration using KPG-101D
• Configuring the Priority (Refer to FPRG 6.9.1
Priority.)
• Configuring the Priority Zone-channel (Refer to
FPRG 6.9.2 Priority Zone-channel.)
21.6.5 Revert CH/GID
Revert CH/GID can be used to configure the
Zone-CH/GID to be used for transmission when the
PTT
switch is pressed during the scan.
Revert CH/GID can be configured by using KPG-101D.
Following are Revert CH/GID operations.
Table 21-7 Revert CH/GID Operation
Note: The next Zone-CH/GID used for the Last Called or Last
Used is stored even if the transceiver is turned OFF.
•
Revert CH/GID
• The last CH/GID on which the transceiver receives a call
• The last CH/GID on which the transceiver transmits
„ Configuration using KPG-101D
• Configuring the Revert CH/GID (Refer to FPRG
6.9.3 Revert CH/GID.)
21.6.6 Dropout Delay Time
Dropout Delay Time is the time from when the received
signal ends to when the transceiver resumes scanning.
The transceiver pauses scanning while receiving a call
during the scan. The transceiver resumes scanning
when the Dropout Delay Time elapses after receiving a
signal.
The transceiver resumes the scan when the following
conditions are met:
•
There is no receiving signal.
• QT/DQT does not match.
• Group ID does not match.
The transceiver activates Talkback during the Dropout
Delay Time in conjunction with the Revert CH/GID
configuration.
When the transceiver pauses scanning during the
Dropout Delay Time, the transceiver checks and looks
back for signals on Priority Channel if the channel on
which scan pauses is not configured as Priority Channel.
Dropout Delay Time can be configured by using
KPG-101D.
Note: Talkback is an operation to transmit on the Zone-CH/GID on
which the transceiver pauses the scan.
„ Configuration using KPG-101D
• Configuring the Dropout Delay Time (Refer to
FPRG 6.9.4 Dropout Delay Time.)
21.6.7 Dwell Time
The scan pauses when the PTT switch is pressed during
the scan. Configure the delay time to resume scanning
after the transceiver stops transmitting.
The transceiver activates Talkback during the Dwell Time
in conjunction with the Revert CH/GID configuration.
When the transceiver pauses scanning during the Dwell
Time, the transceiver checks and looks back for signals
on Priority Channel if the channel on which scan pauses
is not configured as Priority Channel.
Note: Talkback is an operation to transmit on the Zone-CH/GID on
which the transceiver pauses the scan.
„ Configuration using KPG-101D
• Configuring the Dwell Time (Refer to FPRG 6.9.5
Dwell Time.)
Configuration
While Transceiver
is Scanning
While Transceiver
Pauses Scanning
Last Called
Last called
Zone-CH/GID
Zone-channel on
which the transceiver
pauses scanning
Last Used
Last used
Zone-CH/GID for
transmission Zone-channel on
which the transceiver
pauses scanning
Selected
Last Zone-CH/GID selected before starting
the scan
Se
Talkback
Last Zone-CH/GID
selected before
starting the scan Zone-channel on
which the transceiver
pauses scanning
Priority Priority Channel
Pr
Talkback
Priority CH/GID
Zone-channel on
which the transceiver
pauses scanning