Kenwood TK-2170 SERIES, Function Reference

Page: 100 / 142

20 FLEETSYNC
88
Index Contents
Confidential FUNC (K)/Ver. 1.01
20.3.2 Receiving a Status Message
The received Status Message is transferred in the
following way.
Table 20-7 Receiving a Status Message
Note:
 To use serial communications, a user must prepare FleetSync
compatible software or external devices.
 The transceiver can store a maximum of 5 Status Messages and
1 Short Message.
 The Status Name appears on the display if the transceiver
receives a Status Message. “ST nn” appears on the display if
the transceiver receives a Status Message without Status
Name.
(Refer to 20.3.7 Status List on page 90.)
„ Transceiver Operation
1. “RECV DAT” appears on the display when the
transceiver starts receiving a Status Message.
2. “COMPLETE” appears on the display when the
transceiver receives a Status Message. (Individual
Call only)
3. The “ ” icon blinks.
• If a Status Name is registered in Status List:
The Status Name configured in the Status List
appears on the display.
• If no Status Name is registered in Status List:
The Status Number appears on the display.
4. The display returns to the previous display.
The “ ” icon stops blinking when the received
Status Message is read. (Refer to 20.6 Stack on
page 95.)
Status Message Description
LCD
The received Status Message appears
on the display.
The Status Message appears on the
display if “Fixed” is selected from the
Message Display Type dropdown list.
The received Status Message appears
on the display for 3 seconds and Selcall
ID appears for 2 seconds if “Alternate” is
selected from the
Message Display
Type dropdown list.
PC Command
The transceiver sends the Status
Message using the serial command. To
use serial communications, a user must
connect the PC or external devices to
the transceiver.