RD-DV5-S/DV7-L/DV5MD-S
3
DISASSEMBLY FOR REPAIR
How to open the tray if it does not come out.
1. Insert a jig and turn it fully ccw in the drawing through the
hole on the loading chassis bottom.
2. Pull out the tray frontward by hand when it comes just out.
Fig .1
* How to make a jig
Insert a hex wrench to a hole of gear (W05-0881-00) in
the drawing below.
If you lost the gear use it which located on DVD mecha-
nism in the drawing (Fig .3).
Fig. 2
Fig. 3
How to open the tray and a clamper.
1. Pull out the tray slightly frontward by hand.
(Refer to Fig .1)
2. Remove the tray.
3. Remove the clamper in the arrow direction.
Fig. 4
4. Remove the tray and clamper upward.
Fig. 5
5cm
以上
(HEX DRIVER)
2mm
2mm
GEAR
DVD(CD) MECHA
GEAR