51
MODE RESET TIMER
This function returns the transceiver to the channel display after a preset timer
expires while in channel menu mode or selcall mode.
To set the mode reset timer:
1
Enter the Setting mode {p.37}.
2
Press the or button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
OFF
The channel menu mode and the selcall mode do not end
automatically.
~
1(second) ~
300(second)
After the set time has passed, exit channel menu mode or
selcall mode.
It can be set in steps of 1 second.
4
Press the
Menu
button to confirm the selection, then press the
PTT
switch or
the
Side
button to return to the operation mode.
TIME-OUT TIMER
The Time-out Timer prevents you from using a channel for a extended durations.
This function is useful, for example, when you accidentally keep the
PTT
switch
pressed. Additionally, by limiting the amount of time you can continuously
transmit, this feature helps you save on battery power consumption.
If you continuously transmit for 1 minutes (default value), the transceiver will stop
transmitting and a tone will sound. To stop the tone, release the
PTT
switch. You
can press the
PTT
switch again to resume transmitting.
To change the default value of 1 minutes:
1
Enter the Setting mode {p.37}.
2
Press the or button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
~
15 (second) ~
600 (second)
Set the time that you can extended durations to talk.
It can be set in steps of 15 second.
4
Press the
Menu
button to confirm the selection, then press the
PTT
switch or
the
Side
button to return to the operation mode.