19
PTT ID (Analog FleetSync)/ SELCALL ON PTT (Digital NXDN)
The transceiver can send a PTT ID signal when pressing the PTT switch
(beginning of transmission) or when pressing and releasing (beginning of
transmission and end of transmission) the PTT switch.
When you use the Caller ID Display function {p.50}, when the transceiver
receives a PTT ID signal, the caller ID of that signal appears on the display, so
you know who is making the call.
1
Enter the Channel setup mode {p.15}.
2
Press the or button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
OFF
PTT ID is not sended.
BOT
Send the PTT ID at the beginning of transmission.
~
List 01 ~
List 99
Send selected list ID number PTT ID at the beginning
and end of transmission.
Reserved
Group
You can select a Reserved Group and talk.
It can be selected when Channel type is Digital or Mixed
and Transmit mode is Digital.
4
Press the
Menu
button to confirm the selection, then press the
PTT
switch or
the
Side
button to return to the operation mode.
Note:
◆
Transceiver's individual ID number is not available for selection as PTT ID.
COMPANDER
The compander (compressor/expander) allows higher clarity of signals, avoiding
excessive noise and interference. When activated, transmitted signals are
compressed before being sent and received signals are expanded when they
arrive.
This function is activate when Channel type is Analog.
1
Enter the Channel setup mode {p.15}.
2
Press the
or
button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
