42
Super Lock
This function prevents the user from mistakenly changing channels or stopping
scan through unexpected operation. When the transceiver is locked, changing of
zone or channel is not allowed even if the selector knob is turned to another zone
or channel.
Press and hold this button for 4 seconds activates the Super Lock function.
• The following Knob/Button function can still be used while Super Lock mode is
activated:
-
Knob function:
Power switch/ Volume control
-
Button function:
PTT, Calling Alert, Squelch Off, Squelch Off Momentary,
Monitor, Monitor Momentary, and Second PTT
*
.
• The transceiver will not be able to enter the following modes while in the Super
Lock mode:
- Self-programming Mode, Channel Confirmation Mode, Button Function
Programming Mode, All Reset Mode, and VOX Function Setup Mode
*
.
Note:
◆
*
: “Second PTT” and “VOX Function Setup Mode” can be activated by your dealer.
◆
The status of this function (enabled or disabled) is retained even if the transceiver is
turned OFF.
To deactivate Super Lock
Turn OFF the transceiver, and press and hold the
PTT
switch and
Side 2
button
while turning ON the transceiver. Once an LED lights yellow, release the
PTT
switch and
Side 2
button within 2 seconds.
• Beep B (2 beeps) sounds and restarts in normal mode.
Zone Down
Press and hold this button to decrease the zone number in steps of 1.
Zone Up
Press and hold this button to increase the zone number in steps of 1.
Channel Down
Press and hold this button to decrease the channel number in steps of 1.
Channel Up
Press and hold this button to increase the channel number in steps of 1.
