14.2
Adjusting the Time
Pressing the
Clock Adjustment
key causes the transceiver to enter Clock Adjustment Mode and then date and time can
be adjusted.
Also, pressing the
Menu
key causes the transceiver to enter Menu Mode, and then the transceiver enters Clock Adjustment
Mode by selecting “Clock Adjustment” and the date and time can be adjusted. (Refer to
.)
Note
When the data configured by using KPG-D1/ D1N is written to the transceiver, the date and time of the internal clock of
the transceiver can be adjusted by sending the date and time configured on the PC to the transceiver. (
Program
> Write Data to the Transceiver > Time Adjustment)
Operating the transceiver
The following is the operation example when “Year/Month/Day” is configured in
Date Format
and “12H” is configured in
Time Format
:
1
Press the
Clock Adjustment
key.
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters Clock Adjustment Mode.
The following operations are the same even if the transceiver enters Clock
Adjustment Mode by pressing the
Menu
key.
2
Configure the year by pressing the
[
]
or
[
]
key, and then press the
[
]
key.
3
Configure the month by pressing the
[
]
or
[
]
key, and then press the
[
]
key.
12 : 34
A
M
Date 13/04/19
Time 12:34 PM
Back
OK
Clock Adjust
12 : 34
A
M
Date 14/04/19
Time 12:34 PM
Back
OK
Clock Adjust
12 : 34
A
M
Date 14/05/19
Time 12:34 PM
Back
OK
Clock Adjust
14 ADJUSTING THE TIME ON THE TRANSCEIVER
14.2 Adjusting the Time
Common FUNC (K, F)/Ver 2.20
238
