manualshive.com logo in svg

Kenwood NX-5800, Common Function Reference

The Kenwood NX-5800 is a high-performance radio communication device designed for seamless connectivity. This user manual provides a comprehensive Common Function Reference guide, enabling users to make the most of their device's features. Download this detailed manual for free from manualshive.com to unlock the full potential of your Kenwood NX-5800.

Share
Download
background image

10.5

About Headset Profile (HSP Connection/ HSP Disconnection)

HSP Connection

 is the function to connect a registered Bluetooth-compatible device to the transceiver by Headset Profile.

If connected by Headset Profile, a voice call can be made using the mic and speaker of the Bluetooth-compatible device.

For connecting by Headset Profile, a Bluetooth-compatible device needs to support Headset Profile.
Also, 

HSP Disconnection

 is the function to reset a connection by Headset Profile.

Connecting by Headset Profile

A Bluetooth-compatible device that supports Headset Profile can be selected and the connection process can be initiated
by one of the following methods:

0

Bluetooth Find Device Mode

Entering Bluetooth Find Device Mode, the transceiver selects a Bluetooth-compatible device and starts pairing. If pairing
is successful, the connection process is automatically initiated.
In this case, if a connected Bluetooth-compatible device exists, connection to the found Bluetooth-compatible device is
initiated after connection to the connected Bluetooth-compatible device is automatically reset. (Refer to 

Finding,

Registering and Connecting a Bluetooth-compatible Device (Bluetooth Find Device)

.)

0

Bluetooth My Devices Mode

Entering Bluetooth My Devices Mode, the transceiver selects a Bluetooth-compatible device registered in the transceiver
and initiates the connection process. In this case, if a connected Bluetooth-compatible device exists, connection to the
selected Bluetooth-compatible device is initiated after connection to the connected Bluetooth-compatible device is
automatically reset. (Refer to 

Displaying a Bluetooth-compatible Device (Bluetooth My Devices)

.)

0

Bluetooth Connect / Disconnect key

When 

Define Bluetooth Device

 is registered in the transceiver with no connected Bluetooth-compatible devices, pressing

the 

Bluetooth Connect / Disconnect

 key starts connection to 

Define Bluetooth Device

.

(Refer to 

Registering and Connecting Using PF Keys (Define Bluetooth Device)

.)

The following is the behavior of the transceiver when the connection process of the transceiver and Bluetooth-compatible
device completes:

0

If the 

PTT

 switch of the transceiver (including the microphone of Mobile) is pressed, or if the External PTT (Voice) port

(Mobile only) is configured low level, the Mic Line of the Bluetooth-compatible device is enabled.

0

The configuration in 

External Microphone Sense

 applies to the microphone sensitivity of the Bluetooth-compatible

device.

0

The speaker to emit audio is switched according to the configuration in 

Bluetooth Speaker

. (Refer to 

Switching the

Speaker to Emit Audio (Bluetooth Speaker)

.)

0

The volume level of the received audio of a Bluetooth-compatible device is operated as follows:

For Portable, or Mobile for which “RF Deck” is configured in Bluetooth Interface Selection:

Based on the volume level 31 of the transceiver, the volume level of the received audio of a Bluetooth-compatible device
is adjusted by the volume operation of the Bluetooth-compatible device. Even if the volume level is operated by the
transceiver, the volume level of the received audio of the Bluetooth-compatible device does not change.

For Mobile for which “Control Head” is configured in Bluetooth Interface Selection (Featured Panel only):

The volume level of the received audio of a Bluetooth-compatible device can be adjusted by the volume operation of
the Bluetooth-compatible device based on the volume level from 0 to 31 of the transceiver. If the volume level is operated
by the transceiver, the volume level of the received audio of the Bluetooth-compatible device also changes.

10 BLUETOOTH COMMUNICATION

10.5 About Headset Profile (HSP Connection/ HSP Disconnection)

Common FUNC (K, F)/Ver 2.20

197

CONTENTS

INDEX

Summary of Contents for NX-5800





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NX-5800

David Clark 9100 SERIES Maintenance Manual preview
9100 SERIES
Brand: David Clark Pages: 22
Harman JBL BAR 5.1 SURROUND Owner'S Manual preview
JBL BAR 5.1 SURROUND
Brand: Harman Pages: 4
Harman JBL BAR 1300 Quick Start Manual preview
JBL BAR 1300
Brand: Harman Pages: 48
Harman Infinity KAPPA 4100msb Owner'S Manual preview
Infinity KAPPA 4100msb
Brand: Harman Pages: 8
Harman JBL CINEMA SB190 Owner'S Manual preview
JBL CINEMA SB190
Brand: Harman Pages: 19
iLive IS809B Manual preview
IS809B
Brand: iLive Pages: 16
Novus NVE-EP200 Installation Manual preview
NVE-EP200
Brand: Novus Pages: 11
Vimar Elvox 88T1 Installer'S Manual preview
Elvox 88T1
Brand: Vimar Pages: 16
KEF Corelli Installation Instructions preview
Corelli
Brand: KEF Pages: 2
Fermax M3ET Quick Start Manual preview
M3ET
Brand: Fermax Pages: 16
Bang & Olufsen BeoSound Shape Installation Manual preview
BeoSound Shape
Brand: Bang & Olufsen Pages: 44
Roadstar HIF-8892EBT User Manual preview
HIF-8892EBT
Brand: Roadstar Pages: 80
Caliber RMD 052DAB-BT Manual preview
RMD 052DAB-BT
Brand: Caliber Pages: 20
Yealink MVC940 Quick Start Manual preview
MVC940
Brand: Yealink Pages: 36
Alpine SWC-D84S Installation Manual preview
SWC-D84S
Brand: Alpine Pages: 16
LAIA CUTE 12X User Manual preview
CUTE 12X
Brand: LAIA Pages: 9
Xtrons HD1003HD User Manual preview
HD1003HD
Brand: Xtrons Pages: 16
Insignia NS-OS112 (French) Manual D'Installation Rapide preview
NS-OS112
Brand: Insignia Pages: 2

Brands by name

Popular brands

Load more brands