14
Making Individual Calls (NXDN/ DMR)
You can select a Unit ID/ name from the list to make a call to those parties on a
channel.
1
Press the button programmed as
[Individual]
,
[Indi Short Message]
or
[Indi Status]
to enter Individual Call Mode.
• Alternatively, press the button programmed as
[Menu]
to enter Individual
Call Mode using the Menu Mode.
• The ID list appears on the display.
2
Press the
[
<B
]
and
[ C> ]
buttons to select a Unit ID/ name from the list that
has been programmed into your transceiver.
3
Press and hold the
PTT
switch to make the call.
• The “ ” indicator blinks. The ID name of the target transceiver are
displayed.
• Speak to the microphone as you would during a normal call.
RECEIVING
1
Select the desired zone and channel. (If the Scan function has been
programmed, you can switch it On or Off as desired.)
2
When you hear the caller’s voice, readjust the volume as necessary.
• If signaling has been programmed on the selected channel, you will hear a
call only if the signaling matches the signaling set up on your transceiver.
Refer to “OPTIONAL SIGNALING” {p.
} for details.
• In Site Roaming, In Voting and Voting with Signaling zones, the transceiver
will automatically search for the strongest signal and receive on that
frequency.
Note:
◆
A ringing tone will sound when receiving a call if the alert tone has been
enabled in the Alert Tone setting. For details, consult your dealer.
