Kenwood NEXEDGE NX-720, Service Manual, Page: 54 / 127

NX-720
54
ADJUSTMENT
• NXDN mode signaling
No. RX TX
1 RAN1 RAN1
2 None PN 9
3 RAN1 Maximum Deviation Pattern
7 None
FSW+PN 9
(PC test mode only)
9
Tone Pattern (1031Hz)
(Simple BER Measurement)
Tone Pattern (1031Hz)
RAN: Radio Access Number
PN
9 : Pseudo-Random Pattern (for production only)
No. 9 Item: PC test mode only
Panel Tuning Mode
■
Transceiver tuning (To enter tuning mode)
To enter tuning mode, press the [ ] key while the trans-
ceiver is in test mode. Use the [ ] key to write tuning data
through tuning modes, and the
[ ]/[ ]
to adjust tuning re-
quirements (1 to 40 9 6 appears on the LCD).
Use the [ ] key to select the adjustment item through
tuning modes. Use the [ ] key to adjust 5 reference level
adjustments, and use the
[ ]
key to switch between Wide/
Narrow/Very narrow.
• LCD display in panel tuning mode
S Q L 0 1 2 4
Adjustment item Adjustment value
5 reference level
: Low
: Low’
: Center
: High’
: High
Narrow/Wide/Very narrow
Narrow
Very narrow
Wide
■
Key operation
Key
Function
Push Hold (1 second)
[ ]/[ ] Adjustment value up/down
[ ]
20Hz/2kHz (During
transmission in balance
adjustment)
-
[ ] Wide/Narrow/Very narrow -
[ ] Shift to panel test mode -
[ ]
To enter 5 reference level
adjustments
-
[ ]
Writes the adjustment
value
-
[ ]
Go to next adjustment
item Back to last adjustment
item
[ ]/[ ] Volume level up/down
[PTT] Transmit
[0] to [ 9 ]
and
[#], [ ]
-
■
5 reference level adjustments frequency
Tuning point RX (MHz) TX (MHz)
Low 136.05000 136.10000
Low’ 145.55000 145.60000
Center 155.05000 155.10000
High’ 164.55000 164.60000
High 173. 9 5000 173. 9 0000
■
9 reference level adjustments frequency
Tuning point RX (MHz) TX (MHz)
Low1 136.05000 136.10000
Low2 140.80000 140.85000
Low3 145.55000 145.60000
Center1 150.30000 150.35000
Center2 155.05000 155.10000
Center3 15 9 .80000 15 9 .85000
High1 164.55000 164.60000
High2 16 9 .30000 16 9 .35000
High3 173. 9 5000 173. 9 0000