Kenwood MultiPro FP734, Instructions Manual

Page: 8 / 80

hints
●
Best results are obtained when the eggs are at room
temperature.
●
Ensure the bowl and whisks are clean and free from grease
before whisking.
maxi-blend canopy
When blending liquids, use the maxi-
blend canopy with the knife blade. It
allows you to increase the liquid
processing capacity from 1 litre to
1.5 litres, prevents leaking and
improves the chopping performance
of the blade.
1 Fit the drive shaft and bowl onto the
power unit.
2 Fit the knife blade.
3 Add ingredients to be processed.
4 Fit the canopy over the top of the
blade ensuring it sits on the ledge
inside the bowl
. Do not push down on the
canopy, hold by the centre grip.
5 Fit the lid and switch on.
slicing/shredding discs
reversible slicing/shredding discs - thick , thin
Use the shredding side for cheese,
carrots, potatoes and foods of a
similar texture.
Use the slicing side for cheese,
carrots, potatoes, cabbage,
cucumber, courgette, beetroot and
onions.
fine (Julienne style) chipper
disc
Use to cut: potatoes for Julienne
style French fries; firm ingredients for
salads, garnishes, casseroles and
stir fries (eg carrot, swede,
courgette, cucumber).
rasping disc
Grates Parmesan cheese and
potatoes for German potato dumplings.
safety
●
Never remove the lid until the cutting disc has
completely stopped.
●
Handle the cutting discs with care - they are
extremely sharp.
to use the cutting discs
1 Fit the drive shaft and bowl onto
the power unit.
2 Holding by the centre grip ,
place the disc onto the drive
shaft with the appropriate side
uppermost
.
3 Fit the lid.
4 Choose which size feed tube
you want to use. The pusher
contains a smaller feed tube for
processing individual items or
thin ingredients.
To use the small feed tube - first
put the large pusher inside the
feed tube.
To use the large feed tube - use both pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher -
never
put your fingers in the feed tube.
hints
● Use fresh ingredients
●
Don’t cut food too small. Fill the width of the large feed tube
fairly full. This prevents the food from slipping sideways
during processing. Alternatively use the small feed tube.
●
When using the chipper disc, place ingredients horizontally.
● When slicing or shredding: food placed upright comes
out shorter than food placed horizontally .
●
There will always be a small amount of waste on the plate or
in the bowl after processing.
6
m
ulti
pro
m
ulti
pro
m
ulti
pro
m
ulti
pro