Kenwood MDX-F1, Instruction Manual

Page: 30 / 56

MDX-F1 (EN)
30
Operation
Let's recording
Contents
Recording on TAPE
C D
0
P
USH OPEN
2 3
TAPE
Dem
o
MENU
SET
V
O
LU
ME/
MULTI C
ON
TR
O
L
V
OL
UM
E/ MULTI C
ON
TR
O
L
2 3
Dem
o
SET
CD
6
•
TAPE REC
0
1
2
5
4 3
1
Select “TAPE RVS.”.
1
Open the door of deck.
2
Insert a tape.
3
Close the door.
÷
Remove tape slack before loading.
÷
When recording is started, the tape is
transported in the direction selected in
this step.
÷
Wind the tape to the position where
recording is to be started.
1
Press the play key.
2
Press the play key again.
3
Stop key (
7
) playback.
(
2
or
3
lights.)
To reverse the transport direction
Select the reverse mode.
∞
Load a tape in deck.
1
Select the tape transport direction.
2
Set the recording condition.
3
This unit cannot record audio on High (Type ) and
Metal (Type
) cassette tapes.
Select an input source
other than “TAPE”
TUNER (Broadcasts)
CD
MD
The character information display shows
the recording input source.
÷
If a CD or MD has already been loaded, it starts to play now.
Press the
7
key to stop it.
1
Press the TAPE REC key to start recording.
2
Play (or tune) the input source to be recorded.
÷
The recording level is adjusted automatically.
÷
Recording stops automatically when the tape side (s) to be recorded have
been fully recorded.
÷
The recording onto MD is not available during recording onto TAPE .
Example:
To select the CD input
Select the source to be recorded.
4
Start recording.
5