Controlling Audio
72
Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the
[
FNC
]
button.
h
h
Popup menu appears.
2
Touch
[
Audio
]
.
See the following section for each
setting.
• Set up speaker/ X’over (P.73)
• Controlling equalizer (P.75)
• Set listening position/ DTA (P.79)
• Controlling general audio (Fader /
Balance) (P.75)
• Set volume offset (P.76)
• Performing zone control (P.77)
• Set sound effect (P.78)
• Memory/recall the audio settings
3 way speaker system setup
Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
1
Press the
[
FNC
]
button.
h
h
Popup menu appears.
2
Touch
[
]
.
h
h
HOME screen appears.
3
Touch
[
]
.
h
h
Source selection screen appears.
4
Touch
[
AV Off
]
.
5
Press the
[
FNC
]
(
1
) button and the
[
–
]
(
2
)
button for 1 second at the same time.
1
2
h
h
Speaker system select screen appears.
6
Select the crossover network mode.
h
h
A confirmation screen appears.
7
Touch
[
Yes
]
.
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader for Controlling General Audio
– Front focus of Listening Position/ DTA
– Selection of the speakers to output sound from
the cell-phone of Blutooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
!B5A-2487-00b_18KWV_K_En.indb 72
2019/04/26 11:16
