Kenwood KVT-526DVD Instruction Manual Download

Page: 12 / 96

KVT-526DVD/KVT-556DVD

Basic Operations

Playing a USB device

When connecting a USB device, playback starts automatically.

Removing the USB device

Press

on the USB control screen to enter the USB suspend mode, and then remove the USB

device. Refer to <USB Device

ontrol> (page 36).

• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

⁄

• If the USB source is selected when a USB device is not connected, "No Device"

is displayed.

• When the playback is stopped and then restarted, the playback will start from

the point where it was stopped at the last time. Even if the USB is removed
and connected again, the playback will start from the last stopped point
unless the contents in the USB device is changed.

• Make sure that the USB device is connected firmly.

B64-4551-00̲00̲E̲en.indd 12

09.10.27 5:13:20 PM

Summary of Contents for KVT-526DVD

































































































Search results

Summary of Contents for KVT-526DVD

Reviews:

Related manuals for KVT-526DVD

Brands by name

Popular brands

Kenwood KVT-526DVD, Instruction Manual

Search results

Summary of Contents for KVT-526DVD

Reviews:

Related manuals for KVT-526DVD

Brands by name

Popular brands