KTF-3 0 1 0 / KTF-2 0 1 0 (En)
7
Useful functions for broadcast reception
Each time the key is pressed, the operation mode changes.
When you press the ACTIVE RECEPTION key, the AR indicator
flashes, and the tuner w ill automatically sw itch the IF BAND, RF
ATT and ANT A/ B functions to select the best conditions for recep-
tion. If, at this time, you change the receiving frequency by adjust-
ing the tuning UP/ DOWN or calling up preset broadcast stations,
you w ill alw ays achieve optimum broadcast w ave reception.
Normally leave the ACTIVE RECEPTION mode ON.
During manual operation of IF BAND, RF ATT and ANT A/ B func-
tions, the ACTIV RECEPTION mode is set to OFF.
AR
-
-
FM
One or the other lights
Light up w hen the
sw itch is turned on.
When there is an adjacent channel w ith strong radio w aves, RF
reciprocal modulation, mixed modulation distortion easily occurs.
By sw itching the RF ATT key ON the RF reciprocal modulation
and mixed modulation can be minimized.
Even w hen the key is set to OFF, if the ACTIVE RECEPTION mode
is ON, it w ill w ork automatically.
This function lets you set the intermediate frequency pass band to
WIDE (w ide band), or NARROW (narrow band).
WIDE:
Normally set the IF BAND to WIDE. This setting allow s
reception of good quality sound w ith minimal distortion.
NARROW: If signal reception is poor due to interference from a neigh-
bouring station w hen the IF BAND is set to WIDE, change
the IF BAND setting to NARROW.
If the ACTIVE RECEPTION mode is set to ON, WIDE or NARROW w ill
be sw itched over automatically.
TUNED
AUTO
M Hz
STEREO
ANT A
B
9
8 ) )
.
One or the other lights
When using 2 exterior antennas, or, an external antenna w ith an
already established antenna (cable broadcast reception antenna
etc.), aligning to the respective set up and reception statuses, A
or B can be sw itched.
If the ACTIVE RECEPTION mode is set to ON, the key w ill sw itch A/
B automatically.
By pressing this key, the automatic stereo function and the auto-
matic tuning function are both sw itched over at the same time
w hen AUTO STEREO or HIGH BLEND (available w ith KTF-3010 only)
is selected.
TUNED
AUTO
M Hz
STEREO
ANT A
8
9 ) )
.
Lights up in the
AUTO mode.
AUTO/ STEREO (STEREO lit during stereo reception):
Usually, set the sw itch to AUTO/ STEREO.
The tuner automatically sw itches betw een stereo and monaural
receptions according to the program being received.
The tuner automatically scans the frequency and stops w hen a
station is tuned in.
HIGH BLEND (available for the FM band w ith KTF-3010 only):
STEREO lit during stereo reception
This function reduces audible noise in the middle band and above
w hen receiving w eak radio w aves during stereo broadcasts. The
tuner automatically scans the frequency and stops w hen a sta-
tion is tuned in.
M ANUAL/ M ONO:
Set the sw itch to OFF w hen noise interferes due to w eak radio
w aves in the stereo reception. The stereo broadcast is received in
monaural and the noise w ill be reduced. When you w ant to tune
in a station w ith w eak radio w aves w hich the auto tuning func-
tion can not pick up, select the manual tuning mode.
IF BAND key (KTF-3010 only /available for the
FM band only)
RF ATT key (KTF-3010 only /available for the
FM band only)
TUNING M ODE key (KTF-3010)
AUTO/M ANUAL key (KTF-2010)
ANT A/B key (KTF-3010 only /available for the
FM band only)
Flashes, then lights
ACTIVE RECEPTION (A.R) key (KTF-3010 only/
available for the FM band only)
ACTIVE
RECEPTION
HIGHBLEND
W IDE
N ARROW
RFATT
IF BAN D
HIGHBLEND
W IDE
N ARROW
RFATT
RF ATT
AN T A/ B
Each press sw itches the turning methods as follow s:
1
AUTO/ STEREO
: AUTO lit (auto tuning)
2
HIGH BLEN D
: AUTO lit, HIGH BLEND LED lit
(auto tuning)
3
M AN UAL/ M ON O : AUTO not lit (manual tuning)
FM
1
AUTO
: AUTO lit (auto tuning)
2
M AN UAL/ M ON O : AUTO not lit (manual tuning)
M W/
LW
AUTO/ M ANUAL
TUN IN G M ODE
KTF-3010
KTF-2010
http://www.usersmanualguide.com/
