electronic speed sensor control
Your mixer is fitted with an electronic speed sensor
control that is designed to maintain the speed under
different load conditions, such as when kneading
bread dough or when eggs are added to a cake mix.
You may therefore hear some variation in speed
during the operation as the mixer adjusts to the load
and speed selected - this is normal.
to fit and use the splashguard
1 Fit the bowl into the base and add the ingredients.
2 Fit the tool then lower the mixer head
3 Fit the splashguard onto the bowl by sliding the cut
away section around the mixer head
.
4 To remove the splashguard reverse the above
procedure.
l
During mixing, ingredients can be added directly to
the bowl via the chute.
care and cleaning
l
Always switch off and unplug before cleaning.
power unit
l
Wipe with a damp cloth, then dry.
l
Never use abrasives or immerse in water.
bowl, tools, splashguard, removable guard
on dough hook
l
Wash by hand, then dry thoroughly or wash in the
dishwasher.
l
Never use a wire brush, steel wool or bleach to clean
your stainless steel bowl. Use vinegar to remove
limescale.
l
Keep away from heat (cooker tops, ovens,
microwaves).
Blenders AT282 and AT283
(if supplied)
Use the blender for soups, drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs, chopping nuts and
crushing ice.
important
The skirt on the bottom of the AT282 acrylic
goblet is fitted during manufacture and no
attempt should be made to remove it.
l
The attachment will not operate if it is
incorrectly assembled or incorrectly fitted
to the kitchen machine or if the medium
speed outlet cover is not fitted.
l
Don’t put dry ingredients into the blender before
switching on. Cut them into cubes, then remove the
filler cap and drop the cubes through the hole in the
lid whilst the machine is running.
l
model AT282
don’t process spices such as cloves,
dill and cumin seeds - they damage the acrylic.
l
Don’t use the blender as a storage container. Keep it
empty before and after use.
l
Never crush ice on its own, always add a little water.
l
model AT282
never blend more than 1.5 litres (2
pints 12fl oz) - less for frothy liquids like milk shakes.
l
model AT283
never blend more than 1.2 litres (2
pints 2fl oz) - less for frothy liquids like milk shakes.
l
Smoothie recipes - never blend frozen ingredients that
have formed a solid mass during freezing, break it up
before adding to the blender.
key
acrylic blender AT282
lid
filler cap
goblet
sealing ring
blade unit
glass blender AT283
filler cap
lid
goblet
sealing ring
blade unit
base
6
Summary of Contents for KM240 series
Page 1: ...Type KM28 KM240 series KM260 series KM280 series instructions ...
Page 3: ... AT282 AT283 ...
Page 4: ... AT282 AT283 AT284 ...
Page 201: ......
