Kenwood KDC-W241AY Service Manual Download Page 13

Page: 13 / 40

KDC-W241AY/W241GY/W3041A/W3041AY/W3041G

/W3041GY/W312A/W312AY/W312G/W312GY/W312SAY

■

MENU-related test mode

Procedure

Note

Press the [B.BOOST] key (main unit)

Press the [DNPP/SBF] and [DIRECT] keys (Remote control)

Continuous forwarding by remote control is prohibited

■

Backup current measurement

Procedure

Note

While ACC OFF (Back Up ON), Reset

MUTE terminal is OFF after 2 seconds, not after 15 seconds.

(During this time, the CD mechanism does not function.)

■

PREOUT switching (except KDC-W241AY/W241GY)

Procedure

Note

In the STANDBY source, press and hold [TI] key for

1 second or longer

Switches PREOUT

■

Fluorescent indicator tube (ED1) short check

Procedure

Note

In the STANDBY source, press [ATT] key

All lights are off

→

Turns on odd and even terminals alternatively every

125ms (terminals that have a maximum number of grids)

→

Turns on only

the odd terminals

→

Turn on only the even terminals

→

■

Clearing CD mechanism information / Service information / DC offset error information (Clearing E2PROM data)

Status

Display

Description

While pressing and holding [2] key and

[5] key, reset-start.

At normal termination

At abnormal termination

While “– – – –” is displayed, power can be ON for 30 minutes. This mode is cancelled by resetting. (The last screen will not be retained.)

Data to be cleared is shown below.

CD mechanism information

CD mechanism error log display

Displays CD loading error data

Displays CD EJECT error data

Displays CD time code count error data (missing count)

Displays CD time code count error data (count not updated)

Service Information

Power ON time display

CD operation time display

CD EJECT times display

PANEL open/close times display

Forced Power OFF information display

DC offset error information

DC offset error 1 display (Provides information on whether there is an improper connection or another error)

DC offset error 2 display (Provides information on the number of capacitor leaks)

■

Clearing DC offset error detection data (E2PROM data clearing)

Procedure

Note

While pressing and holding [3] key and [6] key, reset-start.

Entering DC offset error display mode.

TEST MODE

Summary of Contents for KDC-W241AY









































Search results

Summary of Contents for KDC-W241AY

Reviews:

Related manuals for KDC-W241AY

Brands by name

Popular brands

Kenwood KDC-W241AY, Service Manual

Search results

Summary of Contents for KDC-W241AY

Reviews:

Related manuals for KDC-W241AY

Brands by name

Popular brands