Kenwood KDC-U553BT, Instruction Manual

Page: 17 / 30

English
17
– Deleting all entries : “DELETE ALL” is
displayed. Press the volume knob.
Turn the volume knob to select “YES”,
then press to confirm.
3. Press the volume knob. “COMPLETE” is
displayed.
4. Press the volume knob to return to Phone
Book operation.
Calling a Number in the Call Log
2
Turn the volume knob to select the
“OUTGOING” (outgoing call), “INCOMING”
(incoming call), or “MISSED CALLS”
(missed call), then press to enter.
3
Turn the volume knob to select a name or
phone number.
4
Press the volume knob to make a call.
■ ■
If your cell-phone cannot download the
Phone Book automatically, the outgoing
call log, incoming call log, and missed call
log contain only the calls dialed from or
received by this unit.
Dialing a Number
2
Turn the volume knob to select “NUMBER
DIAL”, then press to enter.
3
Turn the volume knob to select the
phone number
■ ■
To move to the next digit, press
¢
.
■ ■
To delete the last digit, press
4
.
■ ■
Press number button (
1
–
0
), #(
FM+
),
*(
AM–
), or +(
¢
) on the remote
controller.
4
Press the volume knob to make a call.
■ ■
Press
OK
on the remote controller.
■ ■
You can input max 32 digits.
Speed Dialing (Preset Dial)
2
Press number button (1 – 6).
3
Press the volume knob to make a call.
Registering in the preset dial number list
2
Enter the phone number with reference
to the following:
Dialing a Number/ Calling a number in the
call log/ Calling a number in the Phone
Book
3
Press and hold number button (1 – 6).
Make a Voice Dialing Call
You can make a voice call using the voice
recognition function of your cell-phone.
1
Press and hold the volume knob to start
voice recognize.
“VOICE TAG” is displayed.
2
Pronounce the name registered in the
cell-phone.
Make a call.
■ ■
To cancel the voice recognize, press and
hold the volume knob.
■ ■
If “NO SUPPORT” is displayed, your
cell-phone does not support the voice
recognition function.
■ ■
If “N/A VOICE TAG” is displayed, your cell-
phone cannot start voice recognition.
■ ■
If your voice cannot be recognized, a
message is displayed. Press and hold
the volume knob to terminate voice
recognition. Retry it again from the
beginning.
■ ■
Audio sound is not output during voice
recognition.
Receiving a Call
Answering a Phone Call
Press or the volume knob.
■ ■
The following operations disconnect the
line: Insert a CD. Connect a USB device.
■ ■
The name of the calling party is displayed
if it has already been registered in the
Phone Book.
Rejecting an Incoming Call
Press SRC.
During a Call
Disconnecting a Call
Press or SRC.
Switching to the Private Mode
Press number button 6 to switches
between Private talk (“PRIVATE TALK”)
and Hands-free talk (“HANDS FREE”).
Adjusting the Voice Volume during a Call
Turn the volume knob.
Continued to next page
B64-4920-00_02_M_English.indd 17 11/12/21 9:43