8
|
KDC-DAB43U/ KDC-DAB4557U
English
|
9
3.3 Changing the initial settings
You can change an initial setting item(s) according
to your viewing or listening preference
1
Press [
8
SRC] to select
STANDBY
.
2
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
3
Turn the volume knob to select
INITIAL SET
,
then press the knob.
4
Turn the volume knob to select a desired
setting item, then press the knob.
- See table below for selection.
- Press [
6
] to return to the previous item.
5
Press and hold [
6
] to exit.
Item
Description
PRESET TYPE
NORMAL
: Memorizes one station or channel for each
preset button in each band (FM1/ FM2/ FM3/ MW/
LW/ DB1/ DB2/ DB3). ;
MIX
: Memorizes one station or channel for each preset
button regardless of the selected band (FM1/ FM2/
FM3/ MW/ LW/ DB1/ DB2/ DB3).
KEY BEEP
ON
/
OFF
: Activates/deactivates tone emission when
a key is pressed.
RUSSIAN SET ON
: Folder name, file name, song title, artist name,
album name are displayed in Russian (if applicable). ;
OFF
: Not displayed in Russian.
P-OFF WAIT
Set the duration until the unit will automatically turn
off (while in standby mode) to save the battery.
“–––”
: Cancels ;
20M
: 20 minutes ;
40M
: 40 minutes ;
60M
: 60 minutes
BUILTIN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
CD READ
“1”
: Automatically distinguishes between audio file
disc and music CD. ;
“2”
: Forces to play as a music CD.
No sound can be heard if an audio file disc is played.
DAB L-BAND ON
: Receives L-BAND ensemble with DAB source. ;
OFF
: Set when there is no L-BAND broadcast station.
Ensemble search and Service List information update
will be faster.
DAB ANT PWR
ON
: Supplies power to the DAB antenna. Set when
using the antenna included with KDC-DAB43U. ;
OFF
: Does not supply power. Set when using passive
antenna without booster.
SWITCH PRE
REAR
/
SUB-W
: Select whether rear speakers or a
subwoofer are connected to the line out terminals on
the rear of the unit (through an external amplifier).
SP SELECT
OFF
/
5/4
/
6×9/6
/
OEM
: Select the speaker size for
optimum performance.
F/W UPDATE UPDATE SYS
The current firmware version is
displayed.
Press the volume knob to update DAB
or system firmware.
YES
: Starts upgrading the firmware. ;
NO
: Does not upgrade firmware.
For details on how to update the
firmware, see:
UPDATE DAB
(
Colored text
: Factory setting)
3.4 Setting the demonstration mode
1
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
2
Turn the volume knob to select
DEMO MODE
,
then press the knob.
3
Turn the volume knob to select
ON
or
OFF
.
If “ON” is selected, display demonstration starts if no
operation is done for about 20 seconds.
4
Press and hold [
6
] to exit.
3.5 Muting upon the reception of a
phone call
The audio system automatically mutes when it
receives an incoming call.
When receiving an incoming call
“CALL” appears.
The audio system pauses.
Listening to the audio during a call
Press [
8
SRC].
“CALL” disappears and the audio system starts
again.
Disconnecting the call
Hang up the phone.
“CALL” disappears and the audio system starts
again.
To use this function
•
To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory.
3. GENERAL
3.1 Basic operations
Turning the power ON/OFF
Press [
8
SRC] to turn the power on.
Press and hold [
8
SRC] to turn the power off.
Selecting a source
Press [
8
SRC] repeatedly to select your desired
source.
Digital radio (“DAB”)
Á
Analog radio (“TUNER”)
Á
USB or iPod (“USB” or “iPod”)
Á
CD (“CD”)
Á
Auxiliary input (“AUX”)
Á
Standby (“STANDBY”)
Adjusting the volume
Turn the volume knob to adjust the sound
volume.
Switching display
Press [SCRL DISP] repeatedly to select an
information.
Press and hold [
SCRL DISP
] to scroll the current
display information.
USB terminal
1
Open the cover.
2
Connect a USB device or iPod.
CA-U1EX or KCA-iP102 (optional accessories) is
recommended to connect a USB device or iPod.
Auxiliary input
1
Open the cover.
2
Connect a portable audio device using a
stereo mini-plug (3.5 mm ø) audio cable.
3.2 Adjusting the clock
1
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
2
Turn the volume knob to select
SETTINGS
,
then press the knob.
3
Turn the volume knob to select
CLOCK
, then
press the knob.
4
Turn the volume knob to select
CLOCK ADJ
,
then press the knob.
5
Turn the volume knob to adjust the hour, then
press to enter minute adjustment.
6
Turn the volume knob to adjust the minute,
then press the knob.
- Press [
E
] / [
F
] to move between the hour
and minute adjustment.
7
Press and hold [
6
] to exit.
Setting the clock
1
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
2
Turn the volume knob to select
SETTINGS
,
then press the knob.
3
Turn the volume knob to select
CLOCK
, then
press the knob.
4
Turn the volume knob to select
TIME SYNC
,
then press the knob.
5
Turn the volume knob to select
ON
or
OFF
,
then press the knob.
”ON”
: The clock time is automatically set using the
Clock Time (CT) data in DAB signal. ;
“OFF”
: Cancels the usage of Clock Time (CT) data in
DAB signal.
6
Press and hold [
6
] to exit.
Summary of Contents for KDC-DAB43U
Page 15: ......
