48
|
KDC-X995/ KDC-BT948HD
Bluetooth Setup
Easy pairing function
1
Enter easy pairing mode
Press the [
] button for at least 1 second.
Any of the following is displayed depending on
cell-phone registration condition:
– “Searching”: When registering a cell-phone for the
first time.
– “(cell-phone name)”: When a cell-phone has
already been registered.
– “Device Full”: When maximum of five cell-phones
have already been registered.
When registering a cell-phone for the first time,
registering a cell-phone
2
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3
Select a cell-phone name
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Input the PIN code
Operation type
Operation
Select the numbers.
Turn the [VOL] knob.
Move to the next digit.
Press the [
¢
] button.
Delete the last digit.
Press the [
4
] button.
5
Transmit the PIN code
Press the [VOL] knob.
If “Pairing Success” is displayed, registration is
completed.
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
6
The receiver is connected to a cell-phone, with
“HF Connect” displayed, and exits the easy
pairing mode.
When a cell-phone has already been registered,
or maximum of five cell-phones have already
been registered/ selecting a cell-phone
2
“(cell-phone name)” or “Device Full” is
displayed.
3
Select a cell-phone name
Turn the [VOL] knob.
✍
To register a new cell-phone, select “Device
Search”, then go to “When registering a cell-
phone for the first time.”
4
Set up the cell-phone name
Press the [VOL] knob.
“
✱
(name)” or “-(name)” is displayed.
“
✱
”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
✍
If a Bluetooth device is already selected, deselect
it, and then select a different one.
5
Exit easy pairing mode
Press the [MENU] button for at least 1 second.
Deleting the registered cell-phone
2
“(cell-phone name)” or “Device Full” is
displayed.
3
Select a cell-phone name
Turn the [VOL] knob.
4
Delete the selected cell-phone
Press the [VOL] knob for at least 2 seconds.
5
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
Bluetooth Setting
You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
Press the [
] button.
✍
You can also select from “Settings” in Menu List
mode.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”.
3
Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
4
MENU VOL
¢
