Kenwood KDC-BT858U, Instruction Manual

Page: 69 / 100

English
|
69
15. Registering a Bluetooth
15-3. Selecting the Bluetooth device
you wish to connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Press [
Ú
].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Settings” > “Pairing” > “Phone
Selection” (to select the cell phone) or “Audio
Selection” (to select the audio player) using
[Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
“(name)” appears.
3
Select a Bluetooth device using [Control]
knob.
‘
*
(name)’ or ‘-(name)’ is displayed.
“
*
”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
Exiting from the Bluetooth mode
Press [
Ú
].
When no device can be selected
• If a cell phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
15-4. Deleting a registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Press [
Ú
].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Settings” > “Pairing” > “Device Delete”
using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
“(name)” appears.
3
Select a Bluetooth device using [Control]
knob.
4
Select “YES” using [Control] knob.
“Completed” appears.
Exiting from the Bluetooth mode
Press [
Ú
].
When a registered device is deleted
• When a registered cell phone is deleted, its phone Book and
log are also deleted.