Kenwood KDC-BT858U, Instruction Manual

Page: 19 / 100

English
|
19
5. DSP settings (KDC-X998, KDC-BT958HD)
5-2. Manual equalizer control
You can adjust the equalizer curve manually.
1
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to <Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Audio Control” > “Manual Equalizer”
using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
4
Select a equalizer control item using [Control]
knob.
Display Description Range
“Gain” Adjust the gain of each band. -9 – 0 – +9 dB
“Q Factor”
[1]
Adjust Q of each band.
1.35/ 1.50 / 2.00
“Bass EXT” –
“ OFF ”/ “ON”
( Colored text : Factory setting)
[1] Function of KDC-X998.
When “Bass EXT” and “Q Factor” are selected, skip
step 5.
5
Select a Band using [Control] knob.
KDC-X998
“BAND1”; 62.5 Hz, “BAND2”; 100 Hz,
“BAND3”; 160 Hz, “BAND4”; 250 Hz,
“BAND5”; 400 Hz, “BAND6”; 630 Hz,
“BAND7”; 1 kHz, “BAND8”; 1.6 kHz,
“BAND9”; 2.5 kHz, “BAND10”; 4 kHz,
“BAND11”; 6.3 kHz, “BAND12”; 10 kHz,
“BAND13”; 16kHz
KDC-BT958HD
“BAND1”; 62.5 Hz, “BAND2”; 160 Hz,
“BAND3”; 400 Hz, “BAND4”; 1 kHz,
“BAND5”; 2.5 kHz, “BAND6”; 6.3 kHz,
“BAND7”; 16 kHz
6
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
When the “Manual Equalizer” item is not displayed
• This function is not available when “iPod” is selected for
“Preset Equalizer”.
5-3. Car type selection
You can compensate the delay of the sound arrival
time by selecting your environment from the car
types.
1
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to <Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select “Audio Control” > “Pro Setup” > “Car
Type” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
4
Select a car type using [Control] knob.
Display Car type
“OFF” Not compensating.
“Compact” Compact car
“Full Size Car” Full size car
“Wagon” Station wagon
“Minivan” Minivan
“SUV” Sport-utility vehicle
“Minivan (Long)” Long Minivan
Exiting from the Function setting mode
Press and hold [
1
/
6
].
To set the delay time finely
• You can compensate the distances in more details by using
<5-7. Delay time control> (page 22) function.