Kenwood KDC-5057SD, Instruction Manual

Page: 74 / 82

74
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
16. Bluetooth settings (KDC-BT73DAB, KDC-BT53U)
16-1. Registering the PIN code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Press [
Ú
].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Settings" > "Detailed Settings" > "PIN
Code Edit" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
3
Input the PIN code
Operation type Operation
Selection of numbers Turn [Control] knob.
Movement to the next digit Press [
F
].
Deletion of the last digit Press [
E
].
Transmission of PIN code Press [Control] knob.
If "Completed" appears and registration is
complete.
Exiting from the Bluetooth mode
Press [
Ú
].
Notes on PIN code input
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
16-2. Downloading the phone book
If the phone book is not downloaded automatically
to this unit to which a cell phone − which is not
compatible with PBAP − is connected, download it
in the following manner:
1
Press [
Ú
].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Settings" > "Transfer Phonebook"
using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
When downloading starts, "Downloading ###"
appears.
When downloading is completed, "Completed"
appears.
Exiting from the Bluetooth mode
Press [
Ú
].
Maximum number of phone numbers that can be
registered
•
Of all registered mobile phones, a total of 400 phones
number can be registered.
•
Up to 32 digits can be registered for each phone number
along with up to 32* characters representing a name.
(*32: Number of alphabetical characters. Fewer characters
can be input depending on the type of characters.)
Cancellation of downloading
• To cancel downloading of the phone book data, operate
the cell phone.