Kenwood KDC-5057SD, Instruction Manual

Page: 22 / 82

22
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
Rear Right speaker "RearR"
0 – 610 cm
Subwoofer Left "SW L"
0 – 610 cm
Subwoofer Right "SW R"
0 – 610 cm
(
Colored text
: Factory setting)
5
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
5-8. Channel level fine adjustments
After DTA compensation, you can finely adjust
the unsatisfactory speaker volume of respective
speaker.
1
Press [SRC] to select a source other than
Standby ("STANDBY").
Refer to <Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" > "Pro Setup" > "DTA
Settings" > "Channel Level" using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
4
Select a speaker using [Control] knob.
Speaker Display Range
Front Left speaker "Front" "L"
-8 – 0 dB
Front Right speaker "Front" "R"
-8 – 0 dB
Rear Left speaker "Rear" "L"
-8 – 0 dB
Rear Right speaker "Rear" "R"
-8 – 0 dB
Subwoofer Left "SW" "L"
-8 – 0 dB
Subwoofer Right "SW" "R"
-8 – 0 dB
(
Colored text
: Factory setting)
5
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
DSP settings (KDC-BT73DAB, KDC-BT53U)