Kenwood KDC-5051U, Instruction Manual

Page: 52 / 59

52
|
KDC-BT51U/ KDC-5751SD/ KDC-5051U
Appendix
About Audio file
• Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
• Playable disc media
CD-R/RW/ROM
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
• Playable USB device
USB mass storage class
• Playable USB device and SD card file system
FAT16, FAT32
Even if the audio files comply with the standards listed
above, the play may be impossible depending on the
types or conditions of media or device.
• Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from
①
to
⑩
.
CD
¡!
2
(
1
) ^ : Folder
¡
: Audio file
3
¡$
4
¡"
¡#
¡P
5
¡%
Folder
Audio file
An online manual about audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/
. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
⁄
•
In this manual, the word “USB device” is used for flash
memories and digital audio players which have USB
terminals.
About SD card
• This unit is capable of playback of SD/SDHC
memory cards complying with the SD or SDHC
standard.
SD card (≤2 GB), SDHC card (≤32 GB)
• A special adapter is required to use a miniSD card,
miniSDHC card, microSD card or microSDHC card.
• The MultiMedia Card (MMC) cannot be used.
• Data recorded in the SD audio format cannot be
played back.
About USB device
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Save backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
• Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 4 m can result in abnormal playback.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (6th generation) • iPod nano (5th generation)
• iPod nano (4th generation) • iPod nano (3rd generation)
• iPod nano (2nd generation) • iPod nano (1st generation)
• iPod with video • iPod classic
• iPod touch (4th generation) • iPod touch (3rd generation)
• iPod touch (2nd generation) • iPod touch (1st generation)
• iPhone 4 • iPhone 3GS
• iPhone 3G • iPhone
• For information on the compatibility of iPod/iPhone
software, visit
www.kenwood.com/cs/ce/ipod/
.
• Type of control available varies depending
on the type of connected iPod. See
www.kenwood.com/cs/ce/ipod/
for further details.
• The word “iPod” appearing in this manual indicates
the iPod or the iPhone connected with the iPod
connection cable* (optional accessory).
* Not supported model KCA-iP500.
• Refer to the web site for connectable iPod and iPod
connection cable.
www.kenwood.com/cs/ce/ipod/
⁄
•
If you start playback after connecting the iPod, the music
that was playing on the iPod is played first.
In this case, “RESUMING” is displayed without displaying a
folder name, etc. Changing the browse item will display a
correct title, etc.
•
You cannot operate iPod if “KENWOOD” or “
✓
” displayed on
iPod.