Kenwood KDC-5051U, Instruction Manual

Page: 18 / 59

18
|
KDC-BT51U/ KDC-5751SD/ KDC-5051U
Tuner Operation
PTY (Program Type)
Selecting the Program Type below and searching
for a station;
Program Type Display
Speech “Speech”
Music “Music”
News “News”
Current Affairs “Affairs”
Information “Info”
Sport “Sport”
Education “Educate”
Drama “Drama”
Culture “Culture”
Science “Science”
Varied “Varied”
Pop Music “Pop M”
Rock Music “Rock M”
Easy Listening
Music
“Easy M”
Light Classical “Light M”
Program Type Display
Serious Classical “Classics”
Other Music “Other M”
Weather “Weather”
Finance “Finance”
Children’s programs “Children”
Social Affairs
“Social”
Religion “Religion”
Phone In “Phone In”
Travel “Travel”
Leisure “Leisure”
Jazz Music “Jazz”
Country Music “Country”
National Music “Nation M”
Oldies Music “Oldies”
Folk Music “Folk M”
Documentary “Document”
•
Speech and Music include the Program type shown
below.
Music: Black character item.
Speech: White character item.
1
Enter PTY mode
Press the [ ] button twice.
2
Select the Program Type
Turn the Control knob.
3
Search for the selected Program Type station
Push the Control knob towards right or left.
4
Exit PTY mode
Press the [ ] button.
⁄
•
This function cannot be used during a traffic bulletin or AM
reception.
•
When the selected Program Type is not found, “No PTY” is
displayed. Select another Program Type.
Program Type preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1
Select the Program Type to preset
Refer to <PTY (Program Type)> (page 18) .
2
Enter Program Type preset mode
Press the [PRESET] button.
3
Select a number and store it in the memory
Turn the Control knob to select memory
number (“1” – “6”), and then press the Control
knob for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [ ] button.
Recalling the preset Program Type
1
Enter PTY mode
Press the [ ] button twice.
2
Enter Preset memory mode
Press the [PRESET] button.
3
Select the number you want to recall from the
memory
Turn the Control knob to select recall number
(“1” – “6”), and then press the Control knob.