9
KDC-138/138CR/139/139S
■
Special displays when all lights are on in STANDBY source
Key
Description of display
Description
Common All lights ON.
All lights ON.
1
Destination terminal
condition indication
T
P
1
1
“TYPE” indicates system µ-com (IC1) destination, and shows
real-time condition of the destination terminal.
Development ID
condition indication
5 : 0
0
7
0
1
K
Development ID – Version (system µ-com: IC1)
2
Serial No. display
0
0
0
0
0
0
0
0
Serial No. is displayed (8 digits)
3
Power ON time display
P
o
n
0
H
X
X
00~50 is displayed for “XX”. When less than 1 hour,
displayed by displayed by increments of 10 minutes.
P
o
n
X
X
X
X
X
00001~10922 is displayed for “XXXXX”. MAX 10922 (hours)
■
3
When Power ON time is displayed, press and hold for
2 seconds or longer to clear Power ON time.
4
Disc operation time display
P
L
y
0
H
X
X
00~50 is displayed for “XX”. When less than 1 hour,
displayed by increments of 10 minutes.
P
L
y
X
X
X
X
X
00001~10922 is displayed for “XXXXX”. MAX 10922 (hours)
■
4
While the disc operation time is displayed, press and hold for
2 seconds or longer to clear the disc operation time.
(Cleared only for displayed media.)
5
Disc EJECT times display
E
J
C
X
X
X
X
X
Disc EJECT times display. MAX 65535 (times)
■
5
While disc EJECT times is displayed, press and hold for
2 seconds or longer to clear disc EJECT times.
6
Panel open/close
times display
P
C
X
X
X
X
X
PANEL open/close times display. MAX 65535 (times)
■
6
Press the key for more than 2 seconds while the PANEL open/
close count is displayed and PANEL open/close count is cleared.
FM
ROM correction version
display
0
1
2
3
The number is the ROM correction version number.
E
R
When E2PROM is not installed.
–
–
–
–
When not written in yet.
o
o
o
o
When data not matched. (due to the difference in versions)
■
AM
ROM data transfer
Audio data initialization
I
n
I
T
AUDIO setting value is re-set to the test mode default value.
Forced Power OFF
information display
P
O
F
F
–
–
–
No forced power OFF
P
O
F
F
P
n
L
Forced power OFF by communication error between system
µ-com and panel.
■
While the forced power OFF data is displayed, press and
hold for 2 seconds to clear the data.
CD information display
mode ON/OFF
For the display contents, refer to “CD information display
mode” in the next section.
■
While in CD information display mode, press and hold for
2 seconds or longer to clear all CD information.
TEST MODE
