Kenwood HM-V655MP Instruction Manual Download

Page: 4 / 56

Before applying power

Accessories

Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was

shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing

materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

FM indoor antenna (1)

AM loop antenna (1)

Remote control unit (1)

Batteries (R6/AA) (2)

AC plug adaptor (1)

Use to adapt the plug on the power

cord to the shape of the wall outlet.

(Accessory only for regions where use

is necessary.)

Video Cord (1)

5281/01-05/EN

6/17/02, 4:49 PM

Summary of Contents for HM-V655MP

























































Search results

Summary of Contents for HM-V655MP

Reviews:

Related manuals for HM-V655MP

Brands by name

Popular brands

Kenwood HM-V655MP, Instruction Manual

Search results

Summary of Contents for HM-V655MP

Reviews:

Related manuals for HM-V655MP

Brands by name

Popular brands