62
MD Edit Functions
Application section
Each press of the
4
or
¢
keys switches the op-
eration.
1
"dISC" :
Disc title
*1
2
"001", "002"..... :
Track title
*2
3
"ALL ERASE " :
Complete erasure of disc and track
titles
4
"[1]", "[2]", "[3]" :
Title Memo
*3
Activate the title input mode.
1
1
Press the TITLE INPUT key.
2
Select the title (disc title or track title) to be
edited.
3
Set the title to be edited.
In case of track title :
Select the desired track No.
(The track can also be selected using the numeric
keys.)
In case of disc title :
Select "
dISC
"
When titles are input in discs and tracks, the titles can be displayed when they are played back. The follow-
ing procedure can also be used to modify or erase input titles.
Select the MD input.
Up to 1792 characters can be input per disc and up
to 80 characters can be input per track. (In case of
alphanumeric and symbol characters)
A space (blank character) also required the same
amount of data as alphanumeric characters. When
deleting a title, it is not recommended to overwrite
spaces on previous characters but use the (CLEAR/
DELETE) function.
ˇ
Total number of title characters
*1
When step
1
-
1
is performed in stop mode, the dis-
play starts with the disc title.
*2
Each press of the
4
or
¢
key displays a track title
in sequence from “
001
”, “
002
”.... When all track titles
have been displayed,
3
then
4
will be displayed.
When step
1
-
1
is performed in play mode, the display
begins with the information on the track being played.
*3
Each press of the
4
or
¢
key causes the selected
title memo number to blink, after which
1
then
2
will
be displayed.
÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷
÷
It takes a while because data should be read out of
the disc.
÷
To cancel the operation in the middle, press the
TITLE INPUT
key any time before step
3
.
List of registered symbols (ASCII codes):
! “ # $ % & ’( ) * + , - . / : ; < = > ` ? @ _ ˆ
TITLE INPUT
¢
4
P.CALL
SET
÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷
With an MD track recorded in the "LP2" or
"LP4" recording mode using the stamping
function, "LP:" will be input at the beginning
of the track title.
‹
Assigning a title to a disc or track
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.