manualshive.com logo in svg

Kenwood HM-383MD, Instruction Manual, Page: 31 / 84

Share
Download
Kenwood HM-383MD Instruction Manual Download Page 31

31

Recording on MD

Basic section

3.

Prepare the recording source.

5.

Start recording.

÷

When recording a CD, pressing the 

CD 

6

 key after step 

1

 starts play-

back of CD and recording of MD simultaneously. (CD sync recording)

÷

When it is required to adjust the recording level of an AUX source com-

ponent, adjust it during record-pause. 

Ø

1

Press the MD rec key (the unit enters record-pause mode).

2

When the preparation is complete, press the MD rec key

again.

3

Start playback of the source. (This step is not required when

recording the Tuner input.)

TUNER (Radio)

:

Receive a station.

CD

:

Put the CD player in record-pause mode at
the beginning of the track to be recorded.

TAPE

:

Search the beginning of the section to be
recorded and put the tape deck in record-
pause mode there.

AUX (Auxiliary input) :

Make the source component ready for re-
ception or playback.

Ø

4.

Set the recording mode.

1

Press the menu key to select "MD REC MODE", then press the
set/demo key.

2

Turn the volume/multi control knob to select the desired re-
cording mode, then press the set/demo key.

3

When "LP2" or "LP4" is selected in step 

2

, turn the volume/

multi control knob to select "LP : STAMP on" or "LP : STAMP
off", then press the set/demo key

.

 

‹

Turning the knob switches the display contents.

"STEREO" : 

Stereo audio can be recorded for the same time

period as the figure indicated on each MD cartridge.

"LP2"  :  

Stereo audio can be recorded for twice the figure of

time indicated on each MD cartridge. ("

LP 

2

" light up)

"LP4" : 

Stereo audio can be recorded for four times the figure

of time indicated on each MD cartridge. ("

LP 

2

4

" light up)

"MONO" :  

Monaural audio can be 

recorded

 for twice the

figure of time indicated on each MD cartridge. ("

MONO

"

light up)

Turning the knob switches the display contents.

"LP : STAMP on"  :

 

Characters "

LP :

" are input at the beginning of

each track title.

"LP : STAMP off"  : 

Characters "

LP :

" are not input at the beginning of

each track title.

Discs or tracks recorded in the LP2 or LP4 mode will produce no sound if
they are played back on a player which is incompatible with the LP2 or LP4
mode. When a disc is expected to be MDLP-incompatible players, record it
in the STEREO or MONO mode.

MD rec

5

5

menu

volume / multi control

set / demo

\

\

\

\

4

4

Summary of Contents for HM-383MD





















































































Reviews:

No comments