5
EN
Preparation section
Kenwood Media Application
Connection of the PC and player
After connecting the AC adaptor to the player, connect the PC to it using the USB cable. If the AC adaptor is not
connected, the data stored in the built-in hard disk drive (HDD) of the player may be destroyed in case the built-in
battery is exhausted. Do not unplug the AC adaptor or USB cable during installation of the application software or
data transfer from the PC to the player.
Use the enclosed AC adaptor (AC-050150A) for this product.
1
Boot the PC.
2
Connect the AC adaptor (provided accessory) to the player.
Recharging of the built-in battery
3
Press the / button shortly to turn the player on.
4
Connect the PC to the player using the USB cable (provided accessory).
Display appears [
] while the USB cable is connected. The operations performed on the player are defeated
while it is connected to a PC.
POINT :
If the player is connected to the PC through a USB hub, the operation is not guaranteed.
To wall AC outlet
PC
USB cable
(provided accessory)
Power cord
(provided accessory)
AC adaptor
(provided accessory)
IMPORTANT:
Be sure to connect the AC adaptor to the
player before connecting the PC to it.
Do not set the BATT. ON/OFF switch to [OFF]
of the Player while the USB cable is connected.
Otherwise, the data may be destroyed.
