Kenwood HD20GA7 Instruction Manual Download Page 19

Page: 19 / 85

Basic section

PLAYER

Stopping playback temporarily (Pause)

Playback of audio data

Press the multi-control (Center) button during playback.

Pressing the multi-control (Center) button to resume playback.

Adjusting the volume

Volume (+) button:

Press to increase the volume.

Volume (-) button:

Press to decrease the volume.

When the volume (+/-) button is pressed, the

volume control bar is displayed. It disappears in

about 2 seconds after the button is released.

POINT :

When the played item contains multiple audio data or after playback is stopped completely, it may take a few

seconds before playback starts after the multi-control (Center) button is pressed.

When about 3 minutes have passed after playback has paused, the player will automatically turn off the power.

Press the volume (+/-) button.

Summary of Contents for HD20GA7






















































































Search results

Summary of Contents for HD20GA7

Reviews:

Related manuals for HD20GA7

Brands by name

Popular brands

Kenwood HD20GA7, Instruction Manual

Search results

Summary of Contents for HD20GA7

Reviews:

Related manuals for HD20GA7

Brands by name

Popular brands