background image

Precautions and notices

Warning!

 Do not operate the device while driving. Using this product does not change the 

requirement for a driver to take full responsibility for his or her behavior. This responsibility includes 
observing all traffic rules and regulations in order to avoid accidents, personal injury or property 
damage.

For your own safety, do not operate the controls of the product while driving.

A window mount is needed when using the recorder in a car. Make sure that you place the 
recorder in an appropriate place, so as not to obstruct the driver's view or deployment of airbags.

Make sure that no object is blocking the camera lens and no reflective material is placed near the 
lens. Please keep the lens clean.

If the car's windscreen is tinted with a coating, this may impact the recording quality.

Connect the charger to a proper power source. The voltage requirements are found on the 
product case and/or packaging.

• 

Do not use the charger if the cord becomes damaged.

• 

Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is 
damaged or exposed to excess moisture.

Caring for your device

Taking good care of your device will ensure trouble-free operation and reduce the risk of damage.

Keep your device away from excessive moisture and extreme temperatures.

Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of 
time.

Do not place anything on top of your device or drop objects on your device.

Do not drop your device or subject it to severe shock.

Do not subject your device to sudden and severe temperature changes. This could cause 
moisture condensation inside the unit, which could damage your device. In the event of moisture 
condensation, allow the device to dry out completely before use.

The screen surface can easily be scratched. Avoid touching it with sharp objects. Nonadhesive 
generic screen protectors designed specifically for use on portable devices with LCD panels may 
be used to help protect the screen from minor scratches.

Never clean your device with the power on. Use a soft, lint-free cloth to wipe the screen and the 
exterior of your device.

Do not use paper towels to clean the screen.

Never attempt to disassemble, repair or make any modifications to your device. 
Disassembly, modification or any attempt at repair could cause damage to your device and even 
bodily injury or property damage and will void any warranty.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as 
your device, its parts or accessories.

To discourage theft, do not leave the device and accessories in plain view in an unattended 
vehicle.

O

verheating may damage the device.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries 
(applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as 
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of 
handling these items and their waste by products.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources while preventing detrimental 
effects on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Precautions for Use

9

8

Summary of Contents for DRV-830


























Reviews: